THIS IS AN ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION UNIT: J4 LOCATION: 1 Vacancy: FMS #3 AHATS, ARDEN HILLS, Minnesota 1 Vacancy: FMS #4, WILLMAR, Minnesota 1 Vacancy: FMS #6, NEW ULM, Minnesota 4 Vacancies: FMS #9, CAMP RIPLEY, Minnesota SELECTING OFFICIAL: FMS #3 - JAMES BROWN / MAJ / 651-282-4741 FMS #4 - DEAN DEMARAIS / CW3 / 651-268-8052 FMS #6 - JORDAN HERZOG / CW3 / 651-268-8562 FMS #9 - ANDREW EBERT / LTC / 320-616-3053 ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED

Major Duties

• Major Duties: This is not an all-inclusive list A SURFACE MAINTENANCE MECHANIC, WG-5801-8/10, WG-08: Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Assists higher graded mechanics in the repair and/or overhaul of major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes routine repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts and components. Performs work in accordance with technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Determines when parts should be cleaned, adjusted or replaced with standard parts to complete work orders. Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity. Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Receives guidance and instruction from a higher graded mechanic or supervisor to perform non-routine and more complex repairs on portions of major assemblies and/or systems. May provide field maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown. Performs other duties as assigned. WG-10: Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. Performs other duties as assigned. The above does not list all duties. The full list of duties can be provided upon request.

Conditions of Employment

Requirements

CONDITIONS OF EMPLOYMENT Minnesota National Guard Membership is required. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Applicants who are not currently a member of the MN National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. Selectee will be required to wear the military uniform. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Must be able to obtain and maintain the appropriate security clearance of the position. Most MNNG position are covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. MILITARY COMPATIBILITY: Upon selection, individuals will undergo a background check to validate suitability for employment with the federal government as permitted by law, regulation, Presidential order or other authority. Suitability is dependent upon the particular requirements for security clearance, sensitivity level, and DOD IT network access. Items checked include, but are not limited to all criminal history record information, employment history, education and fiscal accountability/responsibility. The individual selected must be assigned to a compatible military position and must also maintain satisfactory membership in the Minnesota Army National Guard.

Qualifications

In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Do not copy and paste the duties, specialized experience, or occupational assessment questionnaire from this announcement into your resume as that will not be considered a demonstration of your qualifications for this position.

MILITARY GRADES: Enlisted, WO1-CW3

Failure to obtain a compatible MOS may result in termination of employment.

GENERAL AND SPECIALIZED EXPERIENCE QUALIFICATIONS REQUIREMENTS:
Description of Work:
Work is covered by the 5800-job family which includes occupations involved in repairing, adjusting, and maintaining self-propelled transportation and other mobile equipment (except aircraft), including any special purpose features with which they may be equipped.

Minimum Requirements:
WG - Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.

Specialized Experience:
WG-08 - Experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.

WG-10 - Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.

Additional applicable job element factors: Knowledge of Equipment Assembly, Installation, Repair, etc., Technical Practices (theoretical, precise, artistic), Use of Measuring Instruments, Ability To Interpret Instructions, Specification, etc. (Includes blueprint reading), Ability To Use and Maintain Tools and Equipment, Trouble shooting.